Monoposto Racing Forum

If you go to http://argent.fia.com/web/fia-public.nsf/35C5837CC89E8BBFC125731500433076/$FILE/5_8856_2000_overalls.pdf for clothing and to http://argent.fia.com/web/fia-public.nsf/B09B2BE079DBB40BC125768C00397425/$FILE/L25_standards_for_helmets.pdf for helmets and to http://argent.fia.com/web/fia-pub...

Plus he'll need to get the gear ratios spot on to get the most from it. Would be interesting to do a comparison at the wheels. One of the advantages of the torque of the VX, paticularly on 45s and 36mm chokes is that you can run as a four speed and indeed at Brands a three speed. This means you can...

....................but a little lacking in the torque department?

John Beattie www.raceenginedesign.biz

Details of the car are here

www.ten-tenths.com/forum/showthread.php?t=83346&page=7

Seems a bit of a mongrel.

The Monoposto Championship is for Single Seater Racing cars which definition in the Blue Book states 'the construction must be symmetrical' and 'when weighed without driver the half weight either side must be equal to half the weight +/- 5%. Am I correct that some later Mallocks have offset engines?...

RedRedWine wrote:I find if I face Stroud which is South West of Wergs I am automatically also facing Kidderminster.

Was actually thinking of somewhere close to the River Teme and not Lee's workshop!

RedRedWine wrote:Mark

Mine were on the mat tonight.

Tony

Were you facing South East or South West at the time?

Nick.

I am shocked more so than anyone else on this news. To be told via Startline of this news is a little disappointing. As Magic Motorsports 3rd and reserve driver I thought I would be in contention for this opportunity. The in season testing ban has also dented any chances too I suspect. As for KERS ...

All sorted. Thanks to Jim B for the ticket and to David C for the offer.

Just need to find an extra digit now to pass the finger print on entry test!

Can anyone help with one ticket for Donington please?

Thanks


Nick.

For Silverstone, what is the chance of me entering the car for both 2000 class and the usual 1600/1800/1000 etc? Atleast that way I can get more track time.... Minimum weight may be an issue. Tony. Being the expert that you are on these cars, is the injection and indeed the engine itself on the 16V...

Mark

Go here www.phpbber.com/phpbb/viewtopic.php?t=7 ... =monoposto

Nick.

What would be interesting to know is whether it is the static test on race day/test day that the Council is participating in or is it an independent drive by test. Several circuits that I know of already have a drive by test either performed by the local council or one from which all the data has to...

I cannot comment on the correct primer if indeed it is anything special. However if you have the wheels blasted and polished then I recommend you have them lacquered. If you don't they will lose air as the magnesium will be slightly porous and the outside surface exposed to the air will oxidise in w...

Shotblast and powder coat.

Bit out of your way but these guys do a lot of race car parts every day. About £150 plus VAT for a set.

Redditch Shotblasting. 01527 529659.